PRODUCT

A selection of tip-Ø and hole interval are available to make
the wrench universal in the range of application, and with
inter-changeable tip and several hole interval.

Use to adjust the belt tensioner on 1999 and later VW Golf, Jetta, Passat, and VW Beetle 1999 - 2003 with 2.0L
petrol engine and 1.9L TDi diesel engine.

The belt tensioner roller has two holes which the two pins of
the double pin Matra V.159, VAG 3387, T10020 are inserted
to turn the belt tensioner roller and tension the timing belt.

Diesel Timing Kit is a set of the essential tool for setting and
locking the camshaft and the crankshaft when changing the
timing belt on Audi, Seat, Volvo and Volkswagen diesel engines.
The kit forms a part of the engine timing & locking, the
comprehensive diesel engine, and the fuel pump timing &
locking.

Access the tight in the engine bay, Volkswagen Audi Group
designs the front end of certain vehicle to slide forward
giving more room for the cam belt and the engine timing
service.
The tool uses through the front panel to slide forward and
hold in the service position.

The comprehensive setting/locking combination kit is for 1.2, 1.4, 1.6, 1.7, 1.8,
1.9, 2.0, 2.5 diesel and petrol engines fitted to Audi, Seat, Skoda and VW vehicles. Include service position, support guides, requires for the application on some VAG vehicles.

Introduction:
The set of the engine timing locking tool is for using on Volkswagen
Transporter 2.4D (95-03) with engine code AAB, AJA (02/95-03).

Introduction:
Suitable for the belt tensioning huge range of VAG 1.8/1.8T,
2.0 FSi/TFSi twin camshaft engines. The belt drive engine
has a chain in head to connect two camshafts. The kit
includes the tool for servicing the chain in head and
establishing the correct valve/camshaft timing.

Introduction:
The special design set of tool is for alignment camshaft
locking and adjusting.

Introduction:
The special kit is for the timing belt replacement on VAG
van with 2.4D/2.5 TDi diesel engine. The kit including the
latest common rail engine. The kit includes crankshaft pulley
holding tool, camshaft setting plate, injection pump and
crankshaft locking pins and tensioner adjuster.